To achieve cross flow ventilation through your container you will need a minimum of (2) two vents. A single vent, including a roof mounted vent such as a Wind Turbine, will not provide the necessary flow through ventilation. For hot air to escape your container, cooler air must be able to enter the container to replace the exhausted hot air.
For these reasons we offer a CONTAINER VENT KIT, at a reduced cost, which includes two of our most popular Vent, the Outer Rib Mount Style 52957-O (shown and described below), to provide everything you need to achieve flow through ventilation.
PARTS LIST:
For these reasons we offer a CONTAINER VENT KIT, at a reduced cost, which includes two of our most popular Vent, the Outer Rib Mount Style 52957-O (shown and described below), to provide everything you need to achieve flow through ventilation.
PARTS LIST:
- Two (2) Galvanized metal louver panels with 2” louvers & mounting flanges bent to conform to standard container wall corrugations.
- Two (2) Perforated aluminum screens bent as above.
- Twelve (12) Stainless Steel mounting screws
- Twelve (12) Stainless Steel fender washers.
- Twelve (12) Stainless Steel locknuts with nylon inserts.
- Installation Instruction Sheet.
- Suggested Vent Placement Guide.
